Preparatory programme

Dutch-taught Master of Electromechanical Engineering Technology

2024-2025

Programme for Masters of Nautical Sciences

47 ECTS-credits

2-CAD 3D Design
Course code:
1305FTICAD
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Automation: Signals, Logic and Sensors (1306FTIFLM) or is enrolled in a bridging/preparatory programme AND The student must enroll for 3-4 Automation: PLC's (1330FTIBTP and 1311FTIBPL) at the same time.
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
  • Marc Martens
3-Design and Production Techniques
Course code:
1310FTIOPR
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
34-Theory of Material Strength
Course code:
1326FTISVM
Semester:
1E/2E SEM
Contact hours:
64
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme.
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Fluïd Mechanics (1306FTIFLM) or is enrolled in a bridging/preparatory programme.
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has been registered for 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS) or is enrolled in a bridging/preparatory programme.
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Heat Transfer (1328FTIWAL) AND is/has been registered for for 4-Climate control: HVAC-concepts (1316FTICON) or is enrolled in a bridging/preparatory programme.
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Materials Science
Course code:
1318FTIMAT
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
5 ECTS-credits
Study load (hours):
140
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics

2023-2024

Programme for Masters of Nautical Sciences

47 ECTS-credits

2-CAD 3D Design
Course code:
1305FTICAD
Semester:
2E SEM
Contact hours:
24
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Automation: Signals, Logic and Sensors (1306FTIFLM) or is enrolled in a bridging/preparatory programme AND The student must enroll for 3-4 Automation: PLC's (1330FTIBTP and 1311FTIBPL) at the same time.
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
  • Marc Martens
3-Design and Production Techniques
Course code:
1310FTIOPR
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
34-Theory of Material Strength
Course code:
1326FTISVM
Semester:
1E/2E SEM
Contact hours:
64
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has been registered for 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme.
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Fluïd Mechanics (1306FTIFLM) or is enrolled in a bridging/preparatory programme.
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has been registered for 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS) or is enrolled in a bridging/preparatory programme.
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Materials Science
Course code:
1318FTIMAT
Semester:
1E SEM
Contact hours:
46
ECTS-credits:
5 ECTS-credits
Study load (hours):
140
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
6-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
2E SEM
Sequentiality:
The student has been registered for 2-Heat Transfer (1328FTIWAL) AND is/has been registered for for 4-Climate control: HVAC-concepts (1316FTICON) or is enrolled in a bridging/preparatory programme.
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics

2022-2023

Programme for Masters of Nautical Sciences

51 ECTS

51 ECTS

2-CAD, 3D Design
Course code:
1304FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Sequentiality:
The student has passed 2-Automation: Signals, Logic and Sensors (1306FTIFLM) or is enrolled in a preparatory programme
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
  • Marc Martens
3-Design and Production Techniques
Course code:
1309FTIOPR
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
34-Theory of Material Strength
Course code:
1326FTISVM
Semester:
1E/2E SEM
Contact hours:
64
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st and/or 2nd semester
Study domain:
Electromechanics
Lecturer(s):
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has passed 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has passed 2-Fluïd Mechanics (1306FTIFLM) or is enrolled in a preparatory programme
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has passed 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS) or is enrolled in a preparatory programme
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Strength of Advanced Materials
Course code:
1318FTISVG
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
6-CAD 3D Simulations
Course code:
1324FTICAD
Semester:
2E SEM
Contact hours:
40
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
6-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
2E SEM
Sequentiality:
The student has passed 2-Heat Transfer (1328FTIWAL) AND must enroll for 4-Climate control: HVAC-concepts (1316FTICON) or is enrolled in a preparatory programme
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics

2021-2022

Programme for Masters of Nautical Sciences

No additional exemptions are given in the preparatory programme based on ECTS-credits obtained in the master of
Nautical Sciences.
The entire programme below must be completed.

51 ECTS-credits

2-CAD, 3D Design
Course code:
1304FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
  • Eric Lenssen
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
  • Marc Martens
3-CAD 2D, Standardization
Course code:
1309FTICAD
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
  • Eric Lenssen
  • Izaak Van Crombrugge
3-Theory of Material Strength
Course code:
1326FTISTM
Semester:
1E SEM
Contact hours:
76
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has passed 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has passed 2-Fluïd Mechanics (1306FTIFLM)
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has passed 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS)
Contact hours:
54
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Strength of Advanced Materials
Course code:
1318FTISGM
Semester:
1E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
6-CAD 3D Simulations
Course code:
1324FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
6-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
2E SEM
Sequentiality:
The student must enroll for 4-Climate control: HVAC-concepts (1316FTICON)
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):

2020-2021

Programme for Masters of Nautical Sciences

No additional exemptions are given in the preparatory programme based on ECTS-credits obtained in the master of
Nautical Sciences.
The entire programme below must be completed.

51 ECTS-credits

2-CAD, 3D Design
Course code:
1304FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
  • Eric Lenssen
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
  • Walter Vanhoeylandt
  • Marc Martens
3-CAD 2D, Standardization
Course code:
1309FTICAD
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
  • Eric Lenssen
  • Izaak Van Crombrugge
3-Theory of Material Strength
Course code:
1326FTISTM
Semester:
1E SEM
Contact hours:
76
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
3-Thermodynamics
Course code:
1016FTITHD
Semester:
1E SEM
Sequentiality:
The student has passed 2-Fluid Mechanics (1306FTIFLM) or is enrolled in a bridging or preparatory programme
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
No contract restriction
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Engineering Sciences
Lecturer(s):
  • Jan Van de Paer
  • Freek Van Riet
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has passed 2-Fluïd Mechanics (1306FTIFLM)
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
5-Automation: PLC's and Robotics
Course code:
1315FTIBST
Semester:
1E SEM
Contact hours:
48
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
5-Electrotechnical Systems: Generators and Drives
Course code:
1314FTIELK
Semester:
1E SEM
Sequentiality:
The student has passed 3-Electrotechnical Systems: Commutator (1307FTIWSS) and 4-Electrotechnical Systems: Electrical Motors (1310FTIWSS)
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Strength of Advanced Materials
Course code:
1318FTISGM
Semester:
1E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
6-CAD 3D Simulations
Course code:
1324FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
6-Electrotechnical systems: Installations
Course code:
1321FTIELK
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
6-Climate Control: HVAC-calculations
Course code:
1332FTIKLI
Semester:
2E SEM
Sequentiality:
The student must enroll for 4-Climate control: HVAC-concepts (1316FTICON)
Contact hours:
56
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):

2019-2020

Programme for Masters of Nautical Sciences

No additional exemptions are given in the preparatory programme based on ECTS-credits obtained in the master of
Nautical Sciences.
The entire programme below must be completed.

48 ECTS-credits

S1-Operating Techniques and Automotive
Course code:
5011FTISBA
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
S1-Elektro Techniques
Course code:
5020FTIELT
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
  • Patrik Cools
S1-Energy
Course code:
5021FTIENE
Semester:
1E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
3-Automation:PLC's
Course code:
1330FTIBTP
Semester:
1E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
  • Walter Vanhoeylandt
  • Marc Martens
3-CAD 2D, Standardization
Course code:
1309FTICAD
Semester:
1E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
  • Walter Janssens
  • Eric Lenssen
3-Theory of Material Strength
Course code:
1326FTISTM
Semester:
1E SEM
Contact hours:
76
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
5-Strength of Advanced Materials
Course code:
1318FTISGM
Semester:
1E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 1st semester
Study domain:
Electromechanics
Lecturer(s):
2-CAD, 3D Design
Course code:
1304FTICAD
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Possibility of resit:
No
Study domain:
Electromechanics
Lecturer(s):
  • Eric Lenssen
S2-Automotive and Electrotechnical systems
Course code:
5018FTISAE
Semester:
2E SEM
Contact hours:
60
ECTS-credits:
6 ECTS-credits
Study load (hours):
168
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
S2-CAD 3D design and simulations
Course code:
5012FTISCA
Semester:
2E SEM
Contact hours:
36
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
continuous assessment
Study domain:
Electromechanics
Lecturer(s):
S2-Elektro Techniques
Course code:
5022FTIELK
Semester:
2E SEM
Contact hours:
30
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
4-Applied Fluid Mechanics
Course code:
1331FTITSL
Semester:
2E SEM
Sequentiality:
The student has passed 2-Fluïd Mechanics (1306FTIFLM)
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):
  • Eddy Janssen
S2-Energy
Course code:
5023FTIENG
Semester:
2E SEM
Contact hours:
32
ECTS-credits:
3 ECTS-credits
Study load (hours):
84
Contract restrictions:
Credit and exam contract not possible
Language of instruction:
Dutch
Exam Period:
exam in the 2nd semester
Study domain:
Electromechanics
Lecturer(s):